Sew a Quilted Tablet Cover With Zippered Pocket

Hi everyone!  This is Jann Newton from Newton Custom Interiors with a tutorial for a cute tablet cover with a zippered pocket for earbuds and/or charger!

How to make a custom quilted tech/tablet cover with pocket for your earbuds or charger. Nice idea to have the zippered pocket.

Tablets or readers have become very popular in the past few years, but most of them don't come with a cover to protect them.  I love my Nook reader, and I decided that I wanted to create a cover to protect it, and wanted to add a zippered pocket for my earbuds.

Quilted Tablet Cover With Zippered Pocket

Materials –

  • 3/4 yards of a reversible quilted fabric – a thin layer of batting is sandwiched between two different fabrics and then quilted.  (I couldn't find a quilted fabric that I liked in my local fabric stores, so I bought two different fabrics – 3/4 yards of each – and quilted them myself).  Here's a picture of the 2 fabrics with the batting in between.

fabric

  • 1 yard of coordinating fabric for binding strips (optional – use pre-made bias tape, extra wide double fold if you don't want to make the binding)
  • 1 button
  • 1 hair elastic
  • Thread to match bias fabric
  • 9″ zipper

Instructions – 

*These figures are to make a cover for my Nook, which is 5″ wide x 8″ long.  You will need to measure your tablet or reader, and adjust your measurements accordingly.

Nook

  •  Cut a rectangle of fabric that is 1 1/2″ wider than your tablet, and double the length of your tablet plus 4″.  Since my Nook is 5″ wide x 8″ long, I cut my rectangle at 6 1/2″ wide x 20″ long.

long rectangle

  •  Round the corners at one end of the rectangle.  I used a spool of thread to mark the curves.

corners

Bias binding or bias tape – (If you're using pre-made bias tape, you can skip these next steps.  Just apply the bias tape in the normal way, encasing the raw edge of the fabric or zipper on both the front and back sides, and top-stitching in place.)

I wanted to use a coordinating fabric for my binding, but I wasn't sure what was the best way to make it.  One day I was watching a Craftsy sewing class taught by Annie Unrein – Sew Sturdy:  Home Organizers, and was thrilled to see that she taught a technique for making bias binding.

  • For this tablet cover you will need to cut 2 strips of the coordinating fabric.  One will be for straight end of the rectangle and the other for the the top of the zippered pocket.  They should be cut the width measurement of the cover x 2″.  I did not cut these on the bias.

banding strips

  •  I also cut a 35″ strip on the bias for the binding that will go all around the edges of the cover in a later step.

bias banding

I'm going to show  the steps to add the binding strip to the straight end of the rectangle.  You will use these same steps to apply the strip at the top of the pocket and the bias strip for around the whole cover.

  • Fold strip in half lengthwise.  Don't iron fold, just pin.  This was a good tip from the Craftsy class, if you don't make an ironed crease in the fabric, then you can adjust the binding if you need to and the crease won't be in the wrong place.

pinned strips

  •  To apply the binding strips, sew the strip to the wrong side of the fabric using a 1/4″ seam allowance, raw edges of the binding strip along the raw edge of tablet cover rectangle.

binding strip sewn

  •  Fold the binding strip over to the right side of the fabric.

strip folded over

  •  Top stitch binding strip in place along folded edge.

binding top stitched

Pocket –

Annie Unrein's Craftsy class also included a lesson for adding a zippered pocket to a bag.  It was the perfect solution to adding a zippered pocket to this tablet cover.

  • Cut out a piece of fabric for the pocket that is the same width as your long rectangle and 1 3/4″ less than the length of your tablet.  My pocket was cut at 6 1/2″ wide x 6 3/4″ long (8″ long minus 1 3/4″).

pocket

  • Lay your zipper face side down on the right side of the top of the pocket fabric.  You can let extra length of the zipper hang over on each end, it will be cut off later.  The long edge of the zipper should slightly hang over the fabric.

zipper

  •  Sew the side of the zipper closest to the edge of fabric – 1/4″ away from edge of zipper.

sewing zipper

  • Fold fabric so that the zipper is face side up.  Turn fabric and zipper over to back side.  Sew along the edge of the zipper on the back side –  encasing the raw edge of fabric.

zipper back

  •  Attach binding to the other edge of the zipper the same way that it was attached to the end of the tablet cover.

binding on zipper

  •  Lay the pocket on the cover rectangle, with right sides together, with the bottom edge of the pocket the length of your tablet minus 1/4″.  Sew pocket to the long rectangle 1/4″ from the raw edge of the pocket.

sewing pocket

  •  Fold pocket at seam so that it is right side up on the long rectangle.  Stitch the top of the pocket to the cover.

pocket folded and sewn

  •  Fold the cover at the pocket seam line.

cover folded

  •  Pin all layers of each side of cover.  Sew the sides together, wrong sides together, with a 1/8″ seam allowance.

sides seams

  •  Sew binding around the cover on the back side, following the binding instructions above.  Turn under the ends of binding so there are no raw edges.

binding on back side

  • Tuck under the ends of binding so there are no raw edges.

raw edges tucked

  • Fold binding over to front side of cover and top-stitch in place.

binding on face of cover

  •  Sew hair elastic to the middle of the underside of the flap.

hair elastic

  • Sew button onto pocket front.

button

You're done!  Enjoy your new quilted tablet cover with pocket!

How to make a custom quilted tech/tablet cover with pocket for your earbuds or charger. Nice idea to have the zippered pocket.

If your charger for your tablet or reader is not too large, it may fit in the pocket too.  You could always make your cover a bit wider to make extra room for the charger.

If you don't need a pocket for your cover, I've also made a cover for my Kindle reader that doesn't have a zippered pocket.

Kindle tablet cover

 

If You'd Like To Support Our Site

If you want to help us continue to bring you a wide selection of free sewing patterns and projects, please consider buying us a coffee.  We'd really, really appreciate it.
Opt In Image
Introducing Jann from Newton Custom Interiors

Hi!  I'm Jann Newton, and I blog about home decor, sewing tutorials and DIY projects at Newton Custom Interiors.

Recently, I was asked to teach a class for Craftsy -  Custom Bedding - Decorative Shams & Bolsters.  So Sew Easy readers enjoy a discount on my class!

Bookmark the permalink.
3 1 vote
Article Rating
Subscribe
Notify of
guest

59 Comments
Inline Feedbacks
View all comments
Judy Madden
Judy Madden

Happy to find this pattern. I did struggle with binding a little on the rounded corners as well as tucking in the raw ends. I think next time I’d leave the corners square and might consider adding 1/4” to length and bind all the way around. Thank you for the directions.

Mayra Cecilia
Admin
Noble Member
Reply to  Judy Madden

Hi Judy, to make the rounded corners, it is best to pull the binding tape a little so it folds around the corner easier.

Jeanne Gold
Jeanne Gold

I’m struggling trying to follow your directions. First there was the math error but then there’s the next major step which I can’t for the life of me figure out what you mean because the picture doesn’t appear to match your directions. By some remote chance did you happen to make a video demonstrating this project? I would really like to try it and then try with different sizes. I have a few grandkids who would love these.

Margot
Margot

I made this as a gift for my parents to cover their new Leveno tablet (9 5/8″ * 6″ * 3/8″). I struggled with the math due to the error in the sample for the Nook. (8 – 1 3/4 is 6 1/4, not 6 3/4).

I used store-bought pre-quilted fabric. The 2″ wide bias was not wide enough. I had to take it off and cut a new bias strip that was 2.5″ wide and that worked nicely.

I used Velcro for the closure since my parents are in their 80s and their fingers are arthritic.

Mayra Cecilia
Admin
Noble Member
Reply to  Margot

That was very thoughtful of you… love to see a picture of your finished project.

Margot Beebe
Margot Beebe
Reply to  Mayra Cecilia

I’m not on FB/Pinterest and I don’t see a way to attach my photos. I have 2 photos of my finished tablet cover.

Mayra Cecilia
Admin
Noble Member
Reply to  Margot Beebe

Perhaps Instagram? you cand do #soseweasyoffical and I and everyone else who follows the # will be able to see it.

Margot Beebe
Margot Beebe
Reply to  Mayra Cecilia

I have a Pinterest account that I used to look around. I’ve never attached a photo anywhere in Pinterest. Or is there an email account of yours that I could send the photos to?

I’m having the same challenge with the sewing machine give-away. I don’t see a way to enter without all the social media options. My old Bernina 830 never lets me down but it’s decorative stitches are a snooze!

Mary
Mary

Very easy to understand and follow. I will have to try this one. I have made other items from this site

Mayra Cecilia
Admin
Noble Member
Reply to  Mary

Go for it Mary, do let me know how you found the project.

Stephanie Posorske
Stephanie Posorske

So cute, nicest kindle cover I have ever made, just love it. Easy to follow directions and adorable results

Janet Lanier
Janet Lanier

Thank you for sharing your project steps. This was such a helpful tutorial and I love the fabrics you chose. So cool how you lined up the print fabric so that the button went right in the middle of the circle. I made my measuring adjustments to make a cover for my iPad. However, I think the next time I’ll try to make it wider and longer. It was fun to learn 2 new things for this project… quilting and bias tape making.

So Sew Easy
Admin
Active Member
Reply to  Janet Lanier

Hi Janet, thanks for the feedback and for sharing a picture of your work. Looks great! Happy sewing, Mayra

sarka k
sarka k

I am only half way through- being away from home & my sewing machine and in need to do something creative I am sewing by hand which is slow but relaxing.

Mayra Cecilia
Admin
Noble Member
Reply to  sarka k

Congratulations this is a lovely bag, I also sew by hand when a machine is not available.

sarka k
sarka k
Reply to  sarka k

My final product

sarka k
sarka k
Reply to  sarka k

My final product-sorry could not attach two pictures at once

Deborah Jane Levin
Deborah Jane Levin

I am struggling to understand this stage…

“Lay the pocket on the cover rectangle, with right sides together, with the bottom edge of the pocket the length of your tablet minus 1/4″. Sew pocket to the long rectangle 1/4″ from the raw edge of the pocket.”

Can you explain it to me….

Kathy

I have a whole bolt of printed musical fabric. I think will use it to make a few of these. I will use them for gifts for my sister’s voice students. I will have to order bulk zippers to keep the cost down.

Cathy Torske
Cathy Torske

I am unable to find the download link

Mayra Cecilia
Admin
Noble Member
Reply to  Cathy Torske

Hi Cathy you need to read the article it gives you the measurements.

Annette Patterson
Annette Patterson

I’m a little confused, if the pocket is cut the same width but 1-3/4″ shorter than tablet length & tablet is 8″ long, wouldn’t it be cut at 6-1/4″ not 6-3/4″ as you have pictured above? Just want to make sure I’m understanding this.

Margot Beebe
Margot Beebe

I spotted that math error also – maybe 1/2 inch difference does not matter. I wish it would be corrected!

Dan
Dan

Great tutorial. I just made my mom a tablet cover and she loves it. Check out my blog post:

http://dudesewslikealady.blogspot.com/2017/06/a-nifty-little-tablet-cover.html

Denise Main
Denise Main

I am making the bag for my tablet. But I noticed that the 9″zipper was too big and used a 7″ instead. Was I wrong?

Mayra Cecilia
Admin
Noble Member
Reply to  Denise Main

No if it worked for you.

Kiki
Kiki

I am thinking about making this, it looks like a great case. Would you consider this project beginner friendly?

Mayra Cecilia
Admin
Noble Member
Reply to  Kiki

HI Kiki, I think you should be fine as a beginner.

trackback

[…] Tablets and readers, like the Kindle, are very popular nowadays, so a lot of people are looking for a handy cover to keep them safe. So, why not cash in on the trend and create this cute, but practical, tablet cover. […]

trackback

[…] Quilted Tablet Cover with Zippered Pocket from So Sew […]

Jaime
Jaime

Just finished one of these last night. First time making quilted fabric, also first time to make bias tape–which by the way I loved. I made my bag for a friend to hold her coloring book/colored pencils, so I enlarged the size a bit. It came out nice, though as with anything, I have learned from my mistakes:-)

Mayra Cecilia
Admin
Noble Member
Reply to  Jaime

Hi Jaime, thanks for letting us know. Glad your project went well.

Jann from Newton Custom Interiors
Jann from Newton Custom Interiors
Reply to  Jaime

Jaime – what a great idea to use this type of bag for a coloring book and colored pencil holder! I’m glad you liked the bias tape!

mom929
mom929

I’m a little in love with the fabrics you used. Where are they from and where can I get them?

mom929
mom929
Reply to  Jann Newton

Thanks. There’s no Hobby Lobby near me, but I’m going to look for something similar at Joann. Something about apple green with grey and black makes me smile. It’s happy! 🙂

Carol at Paddysgear
Carol at Paddysgear

Thanks Jann, really good tutorial. Just made one for my husband’s new “toy” & he’s thrilled with it.

Jann from Newton Custom Interiors
Jann from Newton Custom Interiors

Thanks Carol! I’m so glad that the tutorial was helpful, and that your husband likes his new tablet cover. I just made one for my mom for her new iPad, and she loved it too!

Sewing Shop

This is a really nice tablet cover, I love the useful pocket! Thanks for explaining this tutorial so well, the pictures also make it very clear.
I featured the tutorial on my blog, click here to see it.

Deby at So Sew Easy
Active Member
Reply to  Sewing Shop

Thank you so much for featuring and linking back to this tutorial on your site – its one of my favorites too. I was interested in your how to sell patterns article as well. Thanks for dropping by.

Sewing Shop

You’re very welcome 🙂
I’m glad you also like my article, thanks!

Jann from Newton Custom Interiors
Jann from Newton Custom Interiors
Reply to  Sewing Shop

Thanks so much for featuring my tutorial!

Sewing Shop

My pleasure!

Pam @Threading My Way

Great idea to have room for cable and charger in the one case. Fabulous design, Jann!!!

Pam @Threading My Way

I’ve featured your fab tutorial today…

Deby at So Sew Easy
Active Member

Thanks so much Pam, you do wonders for the online sewing community.

Jann from Newton Custom Interiors
Jann from Newton Custom Interiors

Thanks Pam!

God's Yes GirlB
God's Yes GirlB

I’m a NEWBIE here, how did you “quilt” your fabric at the very beginning?

Deby at So Sew Easy
Active Member

You can usually buy pre-quilted fabric at your local store, or somewhere like a JoAnn. If not, then yes you would pre-quilt the fabric before cutting out the pieces you need, because it will shrink up a little as part of the quilting process.

God's Yes Girl
God's Yes Girl

Do you have a tutorial on how your quilt your fabric?

Deby at So Sew Easy
Active Member
Reply to  God's Yes Girl

Not directly, but its pretty easy. You can add a fleece or a low loft batting between two pieces of cotton, smooth it out and add some pins to keep things in place. Make sure the fabric is facing right sides out top and bottom. Then draw a line somewhere down the center and sew through all the layers on that line. Then you can either measure and mark your next line, or you can use your presser foot as a guide. Sometimes they also come with a guide you can slide in which keeps your lines even. Work out a line at a time from the center in each direction, smoothing the fabric flat as you go. Once you’ve done one way, switch around and draw a center diagonal line to make a diamond pattern and work out from that line again until all your fabric is quilted. Then you cut the quilted fabric into the pieces you need. Hope that helps.

Jann from Newton Custom Interiors
Jann from Newton Custom Interiors

Deby, thanks for answering this! Yes, that’s how I quilted the fabric. It was not intentional when I bought the fabric for the inside of the case, but I ended up being able to use the diamond pattern in the fabric as a guide. Pinned all the layers together, and then started in the center rows working out to each side both directions.

Anne

Great tablet cover! I’ve got a Craft Gossip post scheduled for later today that links to your tutorial:
http://sewing.craftgossip.com/?p=82224
–Anne

Deby at So Sew Easy
Active Member
Reply to  Anne

Thanks so much Anne !

Jann from Newton Custom Interiors
Jann from Newton Custom Interiors

Wow, thanks Anne!

Laura
Laura

Awesome Jann! and as usual I love your fabric choices!! Pinning!!

Jann from Newton Custom Interiors
Jann from Newton Custom Interiors
Reply to  Laura

Thanks Laura!