Making Bag Handles From Twisted Fabric Scraps

Step Two: Twisting the bag handles

Thread the cord through the what is now a very long casing, as in the floor mat post, this part can be a little difficult however, I found that if you wrap some tape to the end, this task becomes much easier.wrapAlso, if you insert a safety pin through the middle of the cord,Untitled design(202) this technique becomes even easier still.Untitled design(203)

Thread the cord through a 1″ ring and fold it in half and pin it to a clipboard, or ask someone to hold it for you.making bag handles

Start twisting both sides until you get and even twist cord.

Tape the ends and do the other handle.

You should have at least a 22″ handle by now.

Untitled design(193)

Bookmark the permalink.

36 Responses to Making Bag Handles From Twisted Fabric Scraps

  1. sharonmelville says:

    Is there a PDF pattern for the Making Bag Handles from Twisted Fabric scraps

  2. Sonnia says:

    That’s a very cool idea for a change from the flat handles that I am accustomed too. Thanks for sharing, will be trying it soon.

  3. Sharleen Newland says:

    There is a wonderful tool for turning tubes, it is called the Fasturn. You can add a cord and turn the tube at the same time!

  4. patricia cantwell. says:

    Hello,
    Thank you for the idea of the twisted handles. I’ve made many bags, but never
    thought of making such interesting handles. My Christmas presents will be
    special this year. Many thanks. Patricia

  5. Marti Morgan says:

    I have always had a problem with handles – this will be a great thing for my future bag making. Thank you, And I love the twisted look!

  6. Shirley Roeder says:

    Your timing is unreal! I was JUST looking for a tutorial on making twisted bag handles! Thank you Thank you Thank you !!!!

  7. Magpie says:

    Great idea! I love the cord wrapped end!

  8. Mea Cadwell says:

    I found a way to make these without the inner cording. Dampen natural fabric (scraps from an old cotton sheet is what I used). Twist the scraps tightly in one direction (clockwise for example) then twist those twists around each other the other direction, makeing sure to keep the original twists tight. Use a hair dryer to dry them and they stay in the twisted shape.

    I had wanted to use this actual tutuorial but didn’t have any available cording. I tried doing it dry but it didn’t keep it’s shape. It’s the wetting/heating that made it work.

    Then I used it on a tote bag that I gave to a friend.

    Thank you for all the tutorials you have for us. They are very much appreciated!

  9. Donna Hawley says:

    thank you so very much for everything you give to your fans

  10. Marlene Walker says:

    THOUGHT I WAS THE ONLY DILL WHO SEWS THROUGH THE NIGHT, I LOVE THE NO INTERUPTIONS OF A NIGHT ON THE MACHINES.LOL

    • Mayra at So Sew Easy says:

      Nope girl still burning the candle at night, find it blissful to sit and work when the house is quiet πŸ™‚

  11. Carl D'Agostino says:

    top notch for sure

  12. mary says:

    hat is waxed cotton where do I get it?

  13. FLOR says:

    Preciosos todos los trabajos, bendiciones

  14. Carol says:

    Thanks Suzan for sharing your method of turning fabric tubes. I always hated pulling the cord through the fabric. it often twisted and took so much time to do. I will definitely give your method a try.

  15. Kathy Mason Bankston says:

    Having lived in Italy for a couple of years, I can sympathize with the fact that the greatest majority of folks are good, honorable people. Sadly, there’s still the chance of becoming a “pickpocket target” virtually wherever we go. One trick popular among purse thieves is to slash handles of purses and take the whole bag on the fly. My question (finally) is: Instead of the cord, would you consider using picture hanging wire, chain, any strong but small diameter metal center support system? It could not be cut, adding to the security of your bag.

    • Mayra at So Sew Easy says:

      Hi Kathy, we’ve actually been working on something like that for a future design. Please stay tuned!

      • Judy Manville says:

        I have not done it (yet), but it occurs to me that using nylon-coated jewellery threading wire (like Beadalon flexible wire) might be a good move alongside the cord – flexible yet almost impossible to cut. Looking forward to making this bag. Thank you for yet another fab pattern. Judy M

        • Mayra at So Sew Easy says:

          Please when you do make it load it in my projects folder at Craftsy, so others can benefit from your idea. Thanks for sharing.

  16. Margaret L says:

    So here’s another question: Wonder what happens when the pickpocket hits your bag? How fast can you punch him?!!! I had a friend who formerly lived in New York City who had her salary grabbed from the inside of a book in her purse as she exited a check cashing booth! She didn’t discover it until she got back to her apartment! While telling her friends, they all sympathized but said it had happened to “everyone” who lived in NYC at some time or another… That’s what scares a little girl from Artesia, New Mexico…

  17. Judy says:

    Just a question to suzannprincess, if you’re sewing the whole piece of cording in your fabric tube, don’t you pull it out of the fabric tube while turning the fabric tube right side out? OR… are you only putting a small length inside of fabric, sewing then turning? I’m having a hard time visualizing this. May have to go try it.

  18. kmacdigi2015 says:

    is there a pdf of this tutorial? I would like to print it as I don’t have internet where I sew… am I missing it somewhere? thank you in advance!

    • Mayra at So Sew Easy says:

      Hi, there will be a pdf in a week or so. We usually don’t have time to do both the site and the PDF for the initial launch. When it is ready, we’ll post to Craftsy. If you put the pattern in your Craftsy account now, I think it will notify you if there is an update which will happen when we post the PDF.

  19. suzanprincess says:

    I’ve learned another method that makes turning fabric tubes easier for me. Allow an extra 1/2″ of fabric length and enough extra cord to hang on to while pulling on it. When sewing your tube together place the cord inside, tucked tight to the fold; sew a 1/4″ seam across the end to attach the cord; sew the side seam being sure to not stitch into the cord. Now just pull the cord through the tube, trim 1/4″ off the sewn end to get rid of the bulk, and there’s your filled tube! If you want an unfilled, flat tube, just remove the cord entirely. I’ve even made spaghetti straps this way, when a safety pin big enough to hand on to would be too large to pass through the tube.

  20. bcwestblog says:

    I really enjoyed this article and they turned out great! I can think of another use. A custom dog leash and collar. Can’t wait for the bag.

What do you think?