{"id":13794,"date":"2014-12-04T06:00:55","date_gmt":"2014-12-04T11:00:55","guid":{"rendered":"https:\/\/so-sew-easy.com\/?p=13794"},"modified":"2015-09-16T10:52:38","modified_gmt":"2015-09-16T15:52:38","slug":"sewing-machine-organizing-pad","status":"publish","type":"post","link":"https:\/\/so-sew-easy.com\/sewing-machine-organizing-pad\/","title":{"rendered":"Non-Slip Sewing Machine Organizing Pad"},"content":{"rendered":"
<\/noscript><\/a>I've been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together<\/a> and today I'll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means it's easy to pull off and empty when it's full.<\/p>\nYou will need:<\/strong><\/p>\n\n1\/2 yard cotton fabric<\/li>\n1 13″x25″ piece of non-skid “grip stop” fabric<\/a><\/li>\n1 13″x25″ piece of fleece or batting<\/li>\n2.5″ piece of velcro<\/li>\nAll seam allowances are 1\/2″ unless stated otherwise – backstitch at the beginning and end of all seams<\/li>\n<\/ul>\nDownload this tutorial to keep<\/h2>\n<\/noscript><\/div>Download the non-slip sewing machine tidy pad tutorial<\/div>You can download these instructions from my design account at Payhip. \u00a0Keep on your computer or in your pattern library and sew at your leisure. \u00a0Enjoy!<\/p><\/div>Download tutorial<\/a><\/div><\/div><\/div><\/div><\/div><\/span><\/p>\nCutting out your pieces<\/h2>\nFirst, cut your cotton fabric pieces. I made a little cutting chart so you can fit it all on 1\/2 yard:<\/p>\n<\/noscript><\/p>\n <\/p>\n\n1 – 13″x19″ (main panel)<\/li>\n1 – 13″x2″ (scissor panel)<\/li>\n1 – 13″x6″ (pocket panel)<\/li>\n1 – 7″x8″ (thread catcher strap)<\/li>\n1 – 2.5″x3″ (scissor strap)<\/li>\n2 – 11″x5″ (thread catcher)<\/li>\n1 – 22″x5″ (pocket)<\/li>\n<\/ul>\nHow to sew your sewing machine pad<\/h2>\nTake your scissor strap and fold it in half so it is 2.5″ wide and 1.5″ high. Sew the long side to form a tube. Trim the seam allowance.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the long sides<\/p>\n<\/noscript><\/a>Pin this onto your scissor panel, about four inches from the bottom. There will be a slight bump in the middle – this is for your small scissors to fit under. Set this aside for a minute.<\/p>\n<\/noscript><\/a>Fold your pocket piece in half, short sides together. Sew along one long side.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
You will need:<\/strong><\/p>\n\n1\/2 yard cotton fabric<\/li>\n1 13″x25″ piece of non-skid “grip stop” fabric<\/a><\/li>\n1 13″x25″ piece of fleece or batting<\/li>\n2.5″ piece of velcro<\/li>\nAll seam allowances are 1\/2″ unless stated otherwise – backstitch at the beginning and end of all seams<\/li>\n<\/ul>\nDownload this tutorial to keep<\/h2>\n<\/noscript><\/div>Download the non-slip sewing machine tidy pad tutorial<\/div>You can download these instructions from my design account at Payhip. \u00a0Keep on your computer or in your pattern library and sew at your leisure. \u00a0Enjoy!<\/p><\/div>Download tutorial<\/a><\/div><\/div><\/div><\/div><\/div><\/span><\/p>\nCutting out your pieces<\/h2>\nFirst, cut your cotton fabric pieces. I made a little cutting chart so you can fit it all on 1\/2 yard:<\/p>\n<\/noscript><\/p>\n <\/p>\n\n1 – 13″x19″ (main panel)<\/li>\n1 – 13″x2″ (scissor panel)<\/li>\n1 – 13″x6″ (pocket panel)<\/li>\n1 – 7″x8″ (thread catcher strap)<\/li>\n1 – 2.5″x3″ (scissor strap)<\/li>\n2 – 11″x5″ (thread catcher)<\/li>\n1 – 22″x5″ (pocket)<\/li>\n<\/ul>\nHow to sew your sewing machine pad<\/h2>\nTake your scissor strap and fold it in half so it is 2.5″ wide and 1.5″ high. Sew the long side to form a tube. Trim the seam allowance.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the long sides<\/p>\n<\/noscript><\/a>Pin this onto your scissor panel, about four inches from the bottom. There will be a slight bump in the middle – this is for your small scissors to fit under. Set this aside for a minute.<\/p>\n<\/noscript><\/a>Fold your pocket piece in half, short sides together. Sew along one long side.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/div>Download the non-slip sewing machine tidy pad tutorial<\/div>You can download these instructions from my design account at Payhip. \u00a0Keep on your computer or in your pattern library and sew at your leisure. \u00a0Enjoy!<\/p><\/div>Download tutorial<\/a><\/div><\/div><\/div><\/div><\/div><\/span><\/p>\nCutting out your pieces<\/h2>\nFirst, cut your cotton fabric pieces. I made a little cutting chart so you can fit it all on 1\/2 yard:<\/p>\n<\/noscript><\/p>\n <\/p>\n\n1 – 13″x19″ (main panel)<\/li>\n1 – 13″x2″ (scissor panel)<\/li>\n1 – 13″x6″ (pocket panel)<\/li>\n1 – 7″x8″ (thread catcher strap)<\/li>\n1 – 2.5″x3″ (scissor strap)<\/li>\n2 – 11″x5″ (thread catcher)<\/li>\n1 – 22″x5″ (pocket)<\/li>\n<\/ul>\nHow to sew your sewing machine pad<\/h2>\nTake your scissor strap and fold it in half so it is 2.5″ wide and 1.5″ high. Sew the long side to form a tube. Trim the seam allowance.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the long sides<\/p>\n<\/noscript><\/a>Pin this onto your scissor panel, about four inches from the bottom. There will be a slight bump in the middle – this is for your small scissors to fit under. Set this aside for a minute.<\/p>\n<\/noscript><\/a>Fold your pocket piece in half, short sides together. Sew along one long side.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
You can download these instructions from my design account at Payhip. \u00a0Keep on your computer or in your pattern library and sew at your leisure. \u00a0Enjoy!<\/p><\/div>
First, cut your cotton fabric pieces. I made a little cutting chart so you can fit it all on 1\/2 yard:<\/p>\n
<\/noscript><\/p>\n <\/p>\n\n1 – 13″x19″ (main panel)<\/li>\n1 – 13″x2″ (scissor panel)<\/li>\n1 – 13″x6″ (pocket panel)<\/li>\n1 – 7″x8″ (thread catcher strap)<\/li>\n1 – 2.5″x3″ (scissor strap)<\/li>\n2 – 11″x5″ (thread catcher)<\/li>\n1 – 22″x5″ (pocket)<\/li>\n<\/ul>\nHow to sew your sewing machine pad<\/h2>\nTake your scissor strap and fold it in half so it is 2.5″ wide and 1.5″ high. Sew the long side to form a tube. Trim the seam allowance.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the long sides<\/p>\n<\/noscript><\/a>Pin this onto your scissor panel, about four inches from the bottom. There will be a slight bump in the middle – this is for your small scissors to fit under. Set this aside for a minute.<\/p>\n<\/noscript><\/a>Fold your pocket piece in half, short sides together. Sew along one long side.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/p>\n
Take your scissor strap and fold it in half so it is 2.5″ wide and 1.5″ high. Sew the long side to form a tube. Trim the seam allowance.<\/p>\n
<\/noscript><\/a>Turn right side out and topstitch the long sides<\/p>\n<\/noscript><\/a>Pin this onto your scissor panel, about four inches from the bottom. There will be a slight bump in the middle – this is for your small scissors to fit under. Set this aside for a minute.<\/p>\n<\/noscript><\/a>Fold your pocket piece in half, short sides together. Sew along one long side.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Pin this onto your scissor panel, about four inches from the bottom. There will be a slight bump in the middle – this is for your small scissors to fit under. Set this aside for a minute.<\/p>\n<\/noscript><\/a>Fold your pocket piece in half, short sides together. Sew along one long side.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Fold your pocket piece in half, short sides together. Sew along one long side.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Turn right side out and topstitch along the seam you just sewed.<\/p>\n<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Set it at the bottom left corner of the pocket panel as shown below:<\/p>\n<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Sew the left side to the scissor panel and then that piece to the main panel. Topstitch the seams away from the scissor panel, making sure to flip the pocket piece around so you don't catch it in the stitching.<\/p>\n<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Now we'll start making pockets for your tools. I wanted spaces for my seam ripper<\/a>, my small screwdriver, a couple pens, my bodkin, and my tweezers since those are all things I use often. You can customize the pockets to fit whatever you want. Lay the tool down and lay the pocket over the top, pinning at the other side. Don't make it so tight that you won't be able to pull the tool out again. Repeat for the other tools.\u00a0 Remove them and sew along the pinned lines you just made.<\/p>\n<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Trim the excess fabric. At the bottom of each pocket, form a small pleat and pin. Baste these down using a 3\/8″ seam allowance so it won't be seen when you're finished.<\/p>\n<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Take your thread catcher strap piece and fold in half, long sides together. Sew one long side.<\/p>\n<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Refold the tube so the seam is in the middle of one side and sew one short end (make sure it's the top if you're using directional fabric). Trim the corners.<\/p>\n<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Turn right side out and topstitch the three finished sides.<\/p>\n<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>For your two thread catcher pieces, use the same method to make a tube and finish the short side (this time, make sure it's the bottom if you're using directional fabric). On one thread catcher, leave a 2.5″ section in the middle unsewn so you can turn it right side out later – this will be your lining piece.<\/p>\n<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>To box the corners: stand the bag up so the bottom seam is lined up with the side and it forms a point. Measure up 1\/2″ from the bottom and mark a line – it should be about 1″ long.<\/p>\n<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Sew along this line and trim the excess.<\/p>\n<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Slide the strap inside the lining thread catcher with the seam towards the inside of the bag.<\/p>\n<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Slide the outer bag inside so it's right sides together with the lining. Line up the seams in the backs with the center seam of the strap. Stitch along the top of the bag, being sure to catch all the layers.<\/p>\n<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Turn right side out through the gap you left in the lining. Fold the seam allowance in and sew very close to the edge to close the lining.<\/p>\n<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Pull the strap out of the way and topstitch the top of the bag.<\/p>\n<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a> Lay the grip stop fabric so the non-skid side is facing up. Attach the softer velcro piece to the bottom left corner, about one inch in from the sides. When you are finished, this will be on the bottom right corner. Add the rougher velcro piece to the top of the thread catcher strap.<\/p>\n<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Make a sandwich of your pieces in this order: fleece\/batting, grip stop (right side up), cotton fabric (right side down). You can see that instead of basting the bottom of the tool pockets, I left the pins in – this made it pretty difficult to sew all at once, which is why I recommend basting. Match all the corners and sides and sew around the edges, leaving a 4″-6″ gap at the top or the side without the pockets to turn the mat.<\/p>\n<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>If you want, you can trim the edges of the fleece to 1\/4″ to cut down on the bulk when it's turned.<\/p>\n<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>To topstitch the mat and close the gap, I found it easiest to lay the mat, grip stop side down on a piece of tissue paper and then sew. This helps the non-skid actually slide through your machine. Don't topstitch over the pockets on the right.<\/p>\n<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a>Rip off as much tissue paper as you can and use a pair of tweezers to pick out the rest (it's faster than it sounds, don't worry).<\/p>\n<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/noscript><\/a><\/p>\nSet your machine on it and enjoy!<\/p>\n<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Set your machine on it and enjoy!<\/p>\n
<\/noscript><\/noscript><\/p>\n","protected":false},"excerpt":{"rendered":"I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
I’ve been slowly working on organizing my sewing space and made this sewing machine pad to keep some tools handy. This is Amy from Friends Stitched Together and today I’ll show you how to make your own! The pocket sizes are customizable and the thread catcher is detachable which means \u2026 Continue reading → <\/span><\/a><\/p>\n","protected":false},"author":15,"featured_media":13891,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","wds_primary_category":0},"categories":[73,64,92,88,4],"tags":[],"_links":{"self":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794"}],"collection":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/comments?post=13794"}],"version-history":[{"count":1,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions"}],"predecessor-version":[{"id":80519,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/posts\/13794\/revisions\/80519"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media\/13891"}],"wp:attachment":[{"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/media?parent=13794"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/categories?post=13794"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/so-sew-easy.com\/wp-json\/wp\/v2\/tags?post=13794"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}